Used for stormwater work around the yard. Full range of fittings available. Elbows, tees, sockets, pits etc.

Storm Water 90 Degree Elbows

Storm Water 90 Degree Elbows

A great stormwater pipe. Connect pipe with solvent cement. Complies with AS/NZS1254

90mm Cap

90mm Cap

Use these 90mm stormwater caps to close off an end of 90mm stormwater pipe. These caps are not threaded.

90mm Stormwater

90mm Stormwater

Connect pipe with solvent cement. Complies with AS/NZS1254.

Ausplastics 100x50x90

Ausplastics 100x50x90

Their versatility allows them to be used across a wide range of industries.

Ausplastics 90mm Stormwater

Ausplastics 90mm Stormwater

Is for sewer and vent use. Connect the pipe with solvent cement.

Ausplastics 45 Degree Elbows

Ausplastics 45 Degree Elbows

Joins two pieces of the same size pipe at an angle of 45°. Used to re-direct the pipeline and to assist in turning corners.

P.M.X 90mm Collar

P.M.X 90mm Collar

Connects and reduces 100mm to 90mm stormwater or sewer pipe to form a grate on top of the pipe. Slips over pipe and can be glued with solvent cement

90mm Slip Socket

90mm Slip Socket

Joins two pieces of the same size pipe. Use to extend existing pipe length or to repair a broken pipe.

90 Degree Tee Piece

90 Degree Tee Piece

Joins three pieces of the same size pipe to form a T junction. Use to re-direct the pipeline and to turn corners within an irrigation system.

45 Degree Sweep Tee

45 Degree Sweep Tee

Reliably joins a branch line and a horizontal drain line.